Navigation Bar

Blinds

A Blind is a pressure retaining plate with a solid end or an open end.
A Figure 8 Blind is two blinds connected with a web or tie bar to facilitate alternation between open or closed lines.

Dimensions: 300#

Flange Ratings:

Blinds

Dimensions of class 300# Raised Face Figure 8 Blanks Weight (approx. lbs)
NPS Inside Diameter B, in. Outside Diameter O, in. Centerline Dimension A, in. Thickness t, in. Web Width W,in. Web Hole Size, Wt Paddle Blinds Paddle Spacers Figure 8 Blinds
1/20.622.002.620.25 1.505/8111
3/40.822.503.250.25 1.503/4111
11.052.753.500.25 1.503/4111
1-1/41.663.123.880.25 1.503/4112
1-1/21.903.624.500.25 2.007/8112
22.384.255.000.38 2.003/4212
2-1/22.885.005.880.38 2.507/8324
33.505.756.620.38 2.507/8334
3-1/24.006.387.250.50 2.507/8457
44.507.007.880.50 2.507/87510
55.568.389.250.62 3.007/810819
66.629.7510.620.62 3.007/8151022
88.6212.0013.000.88 3.501261538
1010.7514.1215.251.00 4.001-1/8472567
1212.7516.5017.751.12 4.001-1/47939113
1414.0019.0020.251.25 4.751-1/410354150
1616.0021.1222.501.50 4.881-3/815174218
1818.0023.3824.751.62 4.501-3/820092285
2020.0025.6227.001.75 4.751-3/8280124390
2424.0030.3832.002.00 5.501-5/8470200650

NOTES:

(1) Hole size (where required due to bolt spacing) shall be the same as the flange bolt hole, and located such that it will not interfere with bolting between two flanges.

(2) The thickness of the web(or tie bar) dimension Wtshall be 0.25" minimum, except when t is less than that of 0.25", Wt shall equal t.