Navigation Bar

Figure 8 Blinds

Ring Type Joint

Goto: Raised Face

Goto: Male RTJ
Female Groove Ring Type Joint

Flange Ratings:

Blinds

Dimensions of class 150# Female RTJ Figure 8 Blanks Weight (approx. lbs)
NPS Inside Diameter B, in. Outside Diameter O, in. Centerline Dimension A, in. Thickness t, in. Web Width W,in. Handle Length L, in Web Hole Size Ring Number Paddle Blinds Paddle Spacers Figure 8 Blinds
11.322.503.120.75 2.0045/8R15213
1-1/41.662.883.500.75 2.0045/8R17213
1-1/21.903.253.880.75 2.2545/8R1921.54
22.384.004.750.75 2.2543/4R22325
2-1/22.884.755.500.88 2.2543/4R25538
33.505.256.000.88 2.2543/4R29538
3-1/24.006.067.000.88 2.5043/4R337411
44.506.757.500.88 2.5053/4R3610616
55.567.628.501 2.7557/8R4014822
66.628.629.501 3.2557/8R43181025
88.6210.7511.751.12 3.7557/8R48302050
1010.7513.0014.251.25 4.0051R52472781
1212.7516.0017.001.38 4.7561R567830111
1414.0016.7518.751.38 5.0061-1/8R598832123
1616.0019.0021.251.50 5.0061-1/8R6412035155
1818.0021.5022.751.62 5.0071-1/4R6817458232
2020.0023.5025.001.62 5.0071-1/4R7220663269
2424.0028.0029.501.88 6.0071-3/8R7632587412

NOTES:

(1) Hole size (where required due to bolt spacing) shall be the same as the flange bolt hole, and located such that it will not interfere with bolting between two flanges.

(2) Female ring-joint groove dimensions shall be in accordance with ASME B16.5.

(3) The thickness of the web(or tie bar) dimension Wtshall be 0.25" minimum, except when t is less than that of 0.25", Wt shall equal t.